トイズマッコイ プルオーバー スウェッパーカー TOYS McCOY TMC2542 (061 マスタード x サンド) スティーブ・マックイーン モチーフデザイン メンズ エクストラヘビーウェイト 裏起毛スウェット生地 新品
Sale price
27,500円 / JPY
Tax included
Free shipping within Japan
トイズマッコイ プルオーバー スウェッパーカー TOYS McCOY TMC2542 スティーブ・マックイーン モチーフデザイン メンズ エクストラヘビーウェイト 裏起毛スウェット生地 新品
TOYS McCOY / トイズマッコイ
色展開はこちらです
サイズ実寸
シルエットは、タイトにもルーズにも偏らず、全体としてレギュラーフィットの範囲に収まるバランスです。身幅を極端に狭く設定したものではなく、また、意図的なオーバーサイズに見えるほどのボリュームも持たせていません。身幅方向には適度なゆとりを確保しつつ、着丈方向を短めにまとめたクラシックなフォルムに仕上げられています。肩線を設けないラグランスリーブ構造により、首元から脇にかけて袖が斜めに切り替わり、肩まわりに自然になじむつくりです。ウエストバンドには長めのリブニットが取り付けられており、腰まわりを適度に引き締めます。身頃の生地が裾リブの上でわずかにたまるように収まることで、クラシックなスウェットパーカーに見られる丸みを帯びたシルエットが生まれます。袖口にも長めのリブニットを使用しているため、手首まわりを適度に保持し、袖口をすっきりと収めます。一枚でメインのスウェットパーカーとして着用することはもちろん、ジャケットやコートなどのインナーとしても合わせやすい設計です。
当店モデルはMサイズを着用しています。モデルは身長175cm、体重59kg、胸囲91cmです。着用感や好みには個人差がありますので、サイズ選びの際は下記の商品実寸を基準に、お手持ちの同種のスウェットパーカーと比較してご検討ください。
身幅：衣服を平らに置き、脇から約3cm下の位置で、端から端までの幅を測定しています。
着丈：背中側の衿付け根部分(身頃とフードの縫い目)から、裾先までの長さを測定しています。
裄丈：背中の衿付け根中央部分から、袖口先端までを測定しています。
肩幅：本製品は肩の縫い目を持たないラグランスリーブ構造のため、一般的なセットインスリーブのような肩幅寸法は計測していません。サイズを比較される際は、身幅、着丈、裄丈を主な基準としてご確認ください。
サイズ計測方法はこちらです
※若干の誤差はご了承ください。
品番
TMC2542 (TMC-2542)
素材
綿100% 14.8オンス エクストラヘビーウェイト 裏起毛スウェット生地 ノンウォッシュ(未洗い仕上げ)
状態・生産国
新品です Made in Japan 日本製
商品説明
TOYS McCOY(トイズマッコイ)のプルオーバースウェットパーカー(メンズ 長袖 ラグランスリーブ フーデッドスウェットシャツ)です。
この製品は、オフショット写真に写るスティーブ・マックイーンが身につけていたプルオーバーパーカーをデザインソースとして再構築した、フーデッドスウェットシャツです。綿100%のエクストラヘビーウェイト裏起毛スウェット生地を使用し、脇に縫い目を設けない丸胴ボディ、ラグランスリーブ、スウェット生地を二重にしたフード、フロントのカンガルーポケット、比較的長く設定された袖口と裾のリブなど、クラシックなアスレチックウェアを意識した構造を取り入れています。スティーブ・マックイーンへのオマージュを込めて仕上げられた、トイズマッコイこだわりの一着です。1枚でメインのプルオーバーパーカーとして着ても、ジャケット等のインナーとしてレイヤードアイテムとしても重宝される汎用性の高いパーカーです。
素材はコットン100%の14.8オンス・エクストラヘビーウェイト・裏起毛丸胴スウェット生地です。ゴツゴツとした糸本来の風合い、縦方向に連なる編み目の列、程よいムラ感を持った無骨な表情が特徴の肉厚なスウェット生地です。しっかりとしたコシとドライな風合いを備え、古き良きアメリカのスウェットウェアを思わせる素朴な空気感と、厚手生地ならではの重厚感、そして手に取った際にも感じられる確かな重量感を持っています。
生地の裏面には起毛加工が施されています。ループ状の糸がそのまま見える一般的な裏毛生地とは異なる、柔らかな起毛面を形成しています。起毛された繊維の間には細かな空気層が生まれやすく、スウェット生地そのものの厚みと組み合わさることで、身体から生じる暖かさを保持しやすい構造となっています。
身頃は、丸編み機によって胴部分を筒状に編み上げた、いわゆる「丸胴」仕様です。一般的なカットソーのように前身頃と後身頃を別々に構成し、左右の脇線で縫い合わせる構造とは異なり、身頃が一続きの筒状になっています。そのため、身頃の左右には縦方向のサイドシームがなく、それに伴う縫い代や生地の重なりも生じません。身体の側面に局部的な厚みや段差ができにく、すっきりとした側面の仕上がりとなります。丸胴構造は、ヴィンテージのアメリカンTシャツやスウェットシャツにも見られる伝統的な構造のひとつで、本製品のクラシックなアスレチックウェアらしい構成を形づくるディテールのひとつです。
また、本製品は製造工程で洗い加工を施していない、未洗い(ノンウォッシュ)仕上げです。そのため、新品時にはまだ洗濯による収縮が生じておらず、編み目がやや開いて見える場合があります。洗濯によって綿繊維と編地が自然に収縮し、編み目の間隔がやや詰まることで、新品時よりも密度感のある、しっかりとした風合いへ変化する傾向があります。冷水でやさしく手洗いし、形を整えて日陰で自然乾燥した場合、縮みは比較的軽微に収まりやすく、主に着丈方向にわずかに現れる傾向があります。身幅方向の変化は比較的小さい傾向にありますが、縮み方や縮みの程度は、洗濯方法、乾燥条件、製品ごとの個体差によって異なります。お湯での洗濯やタンブル乾燥は、編地に大きな収縮を生じさせ、縮みの程度を予測しにくくする可能性がありますので、お避けください。
袖はラグランスリーブ仕様です。衿元付近から脇下へ向かって斜めに伸びる縫い線によって、袖と身頃を接続しています。肩線を設けない構造のため、着用者の肩の形に沿って自然になじみやすい設計です。
フードは一枚仕立てではなく、身頃と同じスウェット生地を二重に使用した構造です。二重構造とすることでしっかりとした厚みとボリュームが生まれ、頭部を覆わず背面へ下ろした状態でも形がつぶれにくく、立体感のある輪郭を保ちやすい仕上がりです。
フードの前端は、左右の生地端を単純に突き合わせるのではなく、一方がもう一方に重なるように構成されています。フード前部には、ドローコードを通すための左右一対のボタンホール状の開口部が設けられており、そこに平紐タイプのドローコードが通されています。前端が重なり合う構造のため、着用時には左右のドローコードの出位置がわずかに非対称に見える場合があります。これはフード前端の重なり構造によって生じるもので、製品仕様上の特徴です。
前身頃には、左右から手を差し入れられるカンガルーポケットが取り付けられています。ポケットは、前身頃の表面に身頃と同じスウェット生地のパーツを重ねて縫い付ける構造で、左右の開口部が内部でつながる一室式です。収納物を確実に保持することを重視した構造というより、両手を差し入れやすいハンドウォーマーポケットとしての性格が強い仕様です。左右の開口部が大きく、内部が一続きになっているため、小物などを収納した場合には、内容物が開口部から落ちる可能性があります。
袖口には、身頃とは別パーツで編み立てたリブニットを使用しています。リブは折り返して二重にし、袖本体へ縫い付けられた構造です。身頃のスウェット生地よりも伸縮性が高く、手首へ適度にフィットしながら、腕の動きにも追従しやすく、袖口が必要以上に開くことを抑えています。袖口リブは一般的なスウェットウェアと比較して長めに設定されており、手首まわりを広い範囲で覆います。これにより袖口から冷気が入り込みにくくなるとともに、ヴィンテージアスレチックウェアを意識した特徴的な袖口のバランスを形成しています。
ウエストバンドには、袖口と同様に長めの別付けリブニットを使用しています。身頃本体よりも伸縮性のあるリブが腰まわりへ適度に沿い、裾をウエスト付近で収まりやすくする構造です。身頃の生地が裾リブの上でわずかにたまることで、クラシックなスウェットシャツ特有の丸みを帯びた、まとまりのあるシルエットを形成します。
フード、肩、アームホール、袖、袖口リブ、裾リブなどの主要な接合部には、2列のステッチが平行に走る2本針縫製を採用しています。これによって縫い合わせ部分の補強性を高めるとともに、接合部にかかる力を2列のステッチへ分散し、着用や動作を繰り返す箇所の安定性を確保しています。また、表面に平行して走る2本のステッチラインが、クラシックなスウェットウェアらしい縫製上の表情も生み出しています。
フロント身頃の左裾付近には、装飾用のネームタグが表側から縫い付けられています。この位置に配されたディテールが、無地を基調としたシンプルなデザインの中に控えめな視覚的ポイントを生み出し、衣服全体のすっきりとした印象を保ちながらアクセントを加えています。
1958年、妻であるニール・アダムスと暮らしていたローレルキャニオンの自宅でくつろぐマックイーンの姿が写真に納められています。そこで彼が身に着けていたのはホワイトジーンズにあわせたプルオーバーパーカーでした。多忙な日々のなかで過ごす彼のプライベートなひとときをイメージし、その雰囲気を現代に蘇らせたのが本製品です。クラシックなスウェットウェアの構造とディテールを随所に取り入れながら、スティーブ・マックイーンが身につけていたプルオーバーパーカーの雰囲気をTOYS McCOYならではの解釈で再構築した一着です。
「TOYS McCOY TMC2542 THE GREAT AMERICAN HERO HEAVYWEIGHT RAGLAN SWEAT PARKA / トイズマッコイ スポーツウェア プルオーバー パーカー 未洗い ノンウォッシュ仕上げ 14.8オンス ヘビーウェイト裏起毛スウェット生地 ラグランスリーブ ロングスリーブ フーデッドスウェットシャツ 丸胴ボディ メンズ カジュアル ファッション アメカジ 無地 かぶりパーカー スティーブマックイーンオフスクリーンモチーフ」
洗濯表記
手洗いができます。洗濯機は使用不可です。
漂白剤の使用禁止。
底面温度を低温として、あて布の上からアイロン仕上げができます。
ドライクリーニング禁止。
脱水せずに日陰で干してください。
タンブラー乾燥機はお避け下さい。
ご確認事項
- 在庫は実店舗および複数のオンラインストアで共有しているため、各サイトの在庫表示にリアルタイムで反映されない場合がございます。
- ご注文をいただいた場合でも、タイミングにより売り切れとなっていることがございます。何卒ご理解・ご了承くださいますようお願い申し上げます。
- すべての寸法は商品を平置きした状態で手作業により計測しているため、商品には個体差があり、計測方法によっても若干の誤差が生じる場合があります。
- 実際の色味は、撮影時の照明環境やご使用のモニター・画面設定により、写真と多少異なって見える場合がございます。
Product Description in English.
TOYS McCOY Men's Steve McQueen-Inspired Extra Heavyweight Raglan Pullover Hoodie, 14.8 oz Cotton Brushed-Back Fleece Hooded Sweatshirt, Tubular Body, Made in Japan TMC2542
TOYS McCOY
See available colors here
This men's pullover hooded sweatshirt is made in Japan by TOYS McCOY and is inspired by the pullover hoodie worn by Steve McQueen in an off-duty photograph. Reinterpreted as a tribute to McQueen, it is made from 14.8 oz extra-heavyweight 100% cotton brushed-back sweatshirt fabric and incorporates a tubular side-seam-free body, raglan sleeves, a double-layer hood, a front kangaroo pocket, and extended rib-knit cuffs and waistband. Major joining areas, including the hood, shoulders, armholes, sleeves, cuffs, and waistband, are reinforced with parallel two-needle stitching. Together, these details create a substantial, classic athletic-sweatshirt character with a clean, understated appearance, while the relatively short body length and balanced regular fit make it easy to wear either on its own or layered under a jacket or coat.
Size and Fit Guide:
Gender: Men.
This hoodie has a balanced regular fit that is neither tight nor loose. The body is not cut excessively slim, nor does it have the exaggerated volume of an intentionally oversized silhouette. Instead, it provides moderate room through the body while keeping the overall length relatively short, creating a classic, compact shape. The raglan sleeve construction eliminates conventional shoulder seams, with the sleeves extending diagonally from the neckline to the underarms so they conform naturally around the shoulders. A relatively deep rib-knit waistband gently draws in the lower body around the waist, allowing the sweatshirt fabric to blouse slightly above the ribbing and create the softly rounded silhouette characteristic of classic sweat hoodies. The cuffs also use extended rib knit, which fits comfortably around the wrists and keeps the sleeve ends neatly in place. This balanced construction makes the hoodie easy to wear as a standalone sweatshirt while also allowing it to layer comfortably under jackets and coats.
Because fit may vary depending on body type and personal preference, please use the actual garment measurements below as your primary reference. For the most accurate comparison, we recommend measuring a similar hooded sweatshirt that fits you well. All measurements are taken by hand with a measuring tape, so slight variations may occur between individual garments and depending on the measuring method.
Our model wears Tagged Size M. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements show the garment itself, not your body measurements.
Please compare them with a similar hoodie from your wardrobe to get a better sense of the fit.
In inches
Tagged Size S
Width: 20.1" / Length: 23.2"
Sleeve: 30.7"
Tagged Size M
Width: 21.3" / Length: 23.6"
Sleeve: 31.9"
Tagged Size L
Width: 22.0" / Length: 24.4"
Sleeve: 33.1"
Tagged Size XL
Width: 23.6" / Length: 25.2"
Sleeve: 33.9"
Tagged Size XXL
Width: 25.6" / Length: 25.6"
Sleeve: 34.6"
In centimeters
Tagged Size S
Width: 51cm / Length: 59cm
Sleeve: 78cm
Tagged Size M
Width: 54cm / Length: 60cm
Sleeve: 81cm
Tagged Size L
Width: 56cm / Length: 62cm
Sleeve: 84cm
Tagged Size XL
Width: 60cm / Length: 64cm
Sleeve: 86cm
Tagged Size XXL
Width: 65cm / Length: 65cm
Sleeve: 88cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Lay the garment flat and measure straight across from side to side, approximately 3cm (about 1.2 in.) below the underarms.
Length (Body Length): Measured from the base of the back collar, where the collar joins the body, straight down to the bottom of the hem.
Sleeve (Center-Back Sleeve Length): Measured from the center back at the base of the collar to the end of the cuff.
Shoulder Width: Not measured. Because this hoodie uses raglan sleeves without conventional shoulder seams, a standard shoulder-width measurement cannot be taken. Please use the width, length, and center-back sleeve measurements as the primary references when comparing sizes.
Made in Japan.
Brand new with tags, in unused condition.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Please note that slight variations in measurements may occur due to individual garment differences and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
1958 Steve McQueen Off-Screen Design Source
In 1958, Steve McQueen was photographed relaxing at his Laurel Canyon home, where he lived with his wife, Neile Adams. In the photograph, he wore a plain pullover sweatshirt hoodie with white jeans, creating a simple off-screen combination distinct from the costumes associated with his film roles.
This TOYS McCOY model takes that private moment and McQueen's understated pullover hoodie as its design source. Rather than relying on printed graphics or conspicuous decoration, the design is defined by the structure of the sweatshirt itself, including the extra-heavyweight cotton fabric, tubular body, raglan sleeves, double-layer hood, extended rib-knit components, kangaroo pocket, and visible double-needle stitching.
These elements reinterpret the atmosphere of McQueen's off-screen sweatshirt through TOYS McCOY's approach to vintage-inspired construction, producing a current pullover hoodie based on the proportions and functional details of classic American sweatwear.
14.8-Ounce Extra-Heavyweight 100% Cotton Sweatshirt Fabric
The sweatshirt is made from 14.8-ounce extra-heavyweight fabric knitted from 100% cotton. The material has substantial thickness, physical weight, and body, giving the garment a markedly heavier and more structured character than a lightweight or medium-weight sweatshirt.
The outer surface retains the rugged character of the yarns, with clearly visible vertical columns of knitted stitches. These vertically aligned columns, technically referred to as wales, are formed by successive knitted loops running along the length of the fabric. The wales remain visible across the surface and give the fabric an identifiable knitted structure rather than the flatter appearance of a woven textile.
The yarns and knitted loops also produce subtle natural variations in height, spacing, and surface texture. The fabric therefore does not appear completely smooth or mechanically uniform. Its slight irregularity and restrained surface variation create the straightforward, rugged appearance associated with traditional American sweatshirt fabrics.
The fabric has a firm body and a distinctly dry hand rather than an exceptionally soft, fluid, or loosely draped feel. Its substantial mass can also be felt when the garment is lifted or held in the hand. Together, the dry texture, firm resilience, visible knitted structure, and physical weight give the sweatshirt the substantial character expected from an extra-heavyweight fabric.
Brushed-Back Interior
The reverse side of the sweatshirt fabric is brushed to raise the cotton fibers and form a soft, finely napped interior surface. This differs from an unbrushed loopback sweatshirt fabric, where the looped yarn structure remains visibly exposed on the reverse side.
During brushing, fibers are lifted from the reverse surface without changing the fundamental knitted construction of the fabric. The resulting nap produces a softer interior texture while adding visible and tactile volume to the already substantial 14.8-ounce material.
Small spaces form among the raised fibers, allowing the brushed layer to hold pockets of air. When combined with the thickness and density of the extra-heavyweight sweatshirt fabric, this structure helps retain warmth generated by the body.
Tubular Side-Seam-Free Body
The torso is knitted as a continuous tube on a circular knitting machine, creating what is commonly referred to as a tubular body. Unlike conventional cut-and-sewn construction, the body is not assembled from separate front and back panels joined along the left and right sides.
Because the torso forms one continuous knitted section, there are no vertical side seams along either side of the body. The corresponding seam allowances, folded edges, and overlapping layers of fabric that would normally occur at these locations are also eliminated.
Removing these side seams helps prevent localized thickness, hardness, and raised ridges from forming along the sides of the torso. This is particularly relevant with an extra-heavyweight fabric, where conventional stacked seam allowances could otherwise produce noticeable bulk. The uninterrupted tubular construction also gives the sweatshirt a clean side profile without visible vertical seam lines.
Tubular body construction is a traditional method found on vintage American T-shirts and sweatshirts. On this model, it forms an integral part of the garment's classic athletic-wear construction rather than serving as an applied decorative feature.
Unwashed Finish and Shrinkage Characteristics
The completed sweatshirt is supplied in an unwashed condition and has not undergone a final washing treatment during production. In its new state, the cotton fibers and knitted loops have not yet contracted and settled through exposure to water and drying. As a result, the spaces between the knitted loops may initially appear slightly more open.
During laundering, the cotton fibers absorb water and the knitted structure contracts naturally. As the garment dries, the loops settle closer together and the spacing between them becomes slightly tighter. This process can give the fabric a denser, more compact appearance and a firmer, more cohesive hand than it has in its original unwashed condition.
When the sweatshirt is gently hand washed in cold water, reshaped, and allowed to dry naturally in the shade, the resulting shrinkage tends to remain comparatively slight. Dimensional change is more likely to appear in the vertical direction, particularly in the body length, while the change across the body width tends to be smaller.
The exact amount and direction of shrinkage cannot be guaranteed. Results may vary according to the individual garment, water temperature, washing duration, mechanical agitation, spin intensity, reshaping after washing, and drying conditions.
Warm or hot water and tumble drying can cause the cotton fibers and knitted structure to contract more extensively. These methods may produce greater and less predictable dimensional changes and should therefore be avoided.
Raglan Sleeve Construction
The sweatshirt uses raglan sleeves. Diagonal seams extend from the area near the neckline toward the underarms, joining each sleeve directly to the body.
This differs from set-in sleeve construction, where a shaped sleeve cap is attached to an armhole at the outer end of a defined shoulder seam. The raglan configuration eliminates a conventional shoulder seam positioned at a fixed shoulder point and creates a continuous transition from the neckline across the shoulder and into the upper arm.
Because the shoulder shape is not divided by a fixed horizontal shoulder seam, the sleeve and upper-body area can settle more naturally along the individual contours of the wearer's shoulders.
Double-Layer Hood Made from Matching Sweatshirt Fabric
The hood is constructed from two layers of the same sweatshirt fabric used for the body rather than as a single-layer component. Using the extra-heavyweight fabric on both the exterior and interior gives the hood substantial thickness, physical weight, and volume.
The double-layer structure supports the three-dimensional shape of the hood and helps prevent it from collapsing completely. When the hood is not worn over the head and rests against the upper back, it retains a fuller and more clearly defined outline than a lightweight single-layer hood.
Overlapping Hood Front with Buttonhole-Style Drawcord Openings
The front edges of the hood are not simply aligned edge to edge. Instead, one side overlaps the other at the front, creating a layered construction where the two sides meet near the neckline.
A pair of buttonhole-style openings is worked into the front of the hood to provide exit points for the drawcord. A flat drawcord passes through the hood channel and emerges through these two openings, allowing the circumference of the hood opening to be adjusted.
Because the hood front uses an overlapping construction, the two drawcord exit points may appear slightly asymmetrical when the garment is worn or viewed from the front. This visual difference results from the layered position of the hood edges and is a characteristic of the construction rather than a requirement for the openings to appear perfectly symmetrical.
Kangaroo Handwarmer Pocket
A kangaroo pocket made from the same sweatshirt fabric as the body is attached to the lower front. The pocket is constructed as a separate fabric panel laid over and sewn onto the exterior surface of the sweatshirt.
Openings on the left and right lead into one continuous interior compartment. Because the two sides are internally connected rather than divided into separate pockets, either hand can pass into the same central space from either opening.
The pocket is configured primarily as a handwarmer rather than as secure storage for small objects. Its large side openings provide easy access for both hands, but the continuous interior does not prevent stored items from moving toward and falling through either opening. Small valuables should therefore not be considered securely contained within the pocket.
Extended Double-Layer Rib-Knit Sleeve Cuffs
Each sleeve is finished with a separate rib-knit cuff. The rib-knit component is folded back on itself to form a double-layer structure and is then sewn to the end of the sweatshirt sleeve.
The rib knit has greater elasticity than the main sweatshirt fabric. This allows the cuff to follow the wrist with moderate tension while accommodating normal movement of the hand and arm. Its elasticity also helps prevent the sleeve opening from spreading excessively during wear.
The cuffs are proportionally longer than those used on many standard sweatshirts and cover a broader area around the wrists. This extended construction reduces open space at the sleeve ends through which cold air can enter while creating the distinctive long-cuff proportions associated with vintage-inspired athletic sweatwear.
Extended Rib-Knit Waistband
The lower body is finished with a separate extended rib-knit waistband. Like the sleeve cuffs, the waistband has greater elasticity than the extra-heavyweight sweatshirt fabric used for the body.
The rib knit follows the waist area with moderate tension and helps the lower edge of the sweatshirt settle around the waist rather than hanging freely below it. As the lower body is drawn inward by the waistband, a small amount of the substantial sweatshirt fabric gathers naturally above the ribbing.
This relationship between the full-bodied sweatshirt fabric and the more elastic waistband creates the softly rounded, cohesive silhouette associated with classic sweatshirt construction. The extended vertical depth of the ribbing also gives the lower body the longer waistband proportions characteristic of vintage-inspired athletic sweatwear.
Double-Needle Stitching at Major Component Junctions
Double-needle stitching is used at major junctions throughout the sweatshirt, including the hood, raglan shoulder areas, armholes, sleeves, cuff attachments, and waistband attachment. Two parallel rows of stitching secure the joined components at these structural locations.
Using two rows of stitching broadens the secured area compared with a single stitched row. It also distributes tension across two parallel rows where the garment is repeatedly subjected to movement and pulling, helping stabilize the joined sections during normal wear.
The parallel rows remain visible on the exterior and make the functional seam construction part of the sweatshirt's appearance. Rather than serving as a separate decorative application, the visible stitching follows the actual component junctions and contributes to the straightforward sewing character associated with classic American sweatwear.
Decorative Label at the Front Left Hem
A decorative label is sewn onto the exterior of the front body near the left hem. Its localized placement creates a subtle visual focal point within the otherwise plain design, adding a restrained accent while preserving the clean overall appearance of the garment.
Care Instructions
Hand wash only. Do not machine wash.
Do not bleach.
Iron at a low temperature using a pressing cloth.
Do not dry clean.
Do not use a machine spin cycle. Drip dry in the shade.
Do not tumble dry.
Because this garment is made from unwashed 100% cotton sweatshirt fabric, washing allows the cotton fibers and knitted structure to contract naturally. When gently hand washed in cold water, reshaped, and dried naturally in the shade, dimensional change tends to remain comparatively limited and may be more noticeable in the body-length direction than across the body. The actual degree and direction of shrinkage can vary according to water temperature, handling, drying conditions, and individual garment characteristics. Machine washing, warm or hot water, machine spin extraction, and tumble drying may cause greater and less predictable shrinkage and should be avoided.
Always follow the care instructions attached to the actual product.
Important Notes
- Inventory is shared among our physical retail store and multiple online stores. As a result, stock status may not be reflected on each website in real time.
- Depending on the timing of inventory updates, an item may already be sold out even after an order has been placed. We sincerely appreciate your understanding.
- All dimensions are measured manually with the garment laid flat. Because individual garments may vary and results can differ slightly depending on the measuring method, minor discrepancies may occur.
- The actual product color may appear slightly different from the photographs depending on the lighting conditions during photography and the settings of your monitor or display.
TOYS McCOY / トイズマッコイ
色展開はこちらです
サイズ実寸
| サイズ実寸 | 身幅 | 着丈 | 裄丈 | 肩幅 |
| メンズSサイズ | 51cm | 59cm | 78cm | - |
| メンズMサイズ | 54cm | 60cm | 81cm | - |
| メンズLサイズ | 56cm | 62cm | 84cm | - |
| メンズXLサイズ | 60cm | 64cm | 86cm | - |
| メンズXXLサイズ | 65cm | 65cm | 88cm | - |
シルエットは、タイトにもルーズにも偏らず、全体としてレギュラーフィットの範囲に収まるバランスです。身幅を極端に狭く設定したものではなく、また、意図的なオーバーサイズに見えるほどのボリュームも持たせていません。身幅方向には適度なゆとりを確保しつつ、着丈方向を短めにまとめたクラシックなフォルムに仕上げられています。肩線を設けないラグランスリーブ構造により、首元から脇にかけて袖が斜めに切り替わり、肩まわりに自然になじむつくりです。ウエストバンドには長めのリブニットが取り付けられており、腰まわりを適度に引き締めます。身頃の生地が裾リブの上でわずかにたまるように収まることで、クラシックなスウェットパーカーに見られる丸みを帯びたシルエットが生まれます。袖口にも長めのリブニットを使用しているため、手首まわりを適度に保持し、袖口をすっきりと収めます。一枚でメインのスウェットパーカーとして着用することはもちろん、ジャケットやコートなどのインナーとしても合わせやすい設計です。
当店モデルはMサイズを着用しています。モデルは身長175cm、体重59kg、胸囲91cmです。着用感や好みには個人差がありますので、サイズ選びの際は下記の商品実寸を基準に、お手持ちの同種のスウェットパーカーと比較してご検討ください。
身幅：衣服を平らに置き、脇から約3cm下の位置で、端から端までの幅を測定しています。
着丈：背中側の衿付け根部分(身頃とフードの縫い目)から、裾先までの長さを測定しています。
裄丈：背中の衿付け根中央部分から、袖口先端までを測定しています。
肩幅：本製品は肩の縫い目を持たないラグランスリーブ構造のため、一般的なセットインスリーブのような肩幅寸法は計測していません。サイズを比較される際は、身幅、着丈、裄丈を主な基準としてご確認ください。
サイズ計測方法はこちらです
※若干の誤差はご了承ください。
品番
TMC2542 (TMC-2542)
素材
綿100% 14.8オンス エクストラヘビーウェイト 裏起毛スウェット生地 ノンウォッシュ(未洗い仕上げ)
状態・生産国
新品です Made in Japan 日本製
商品説明
TOYS McCOY(トイズマッコイ)のプルオーバースウェットパーカー(メンズ 長袖 ラグランスリーブ フーデッドスウェットシャツ)です。
この製品は、オフショット写真に写るスティーブ・マックイーンが身につけていたプルオーバーパーカーをデザインソースとして再構築した、フーデッドスウェットシャツです。綿100%のエクストラヘビーウェイト裏起毛スウェット生地を使用し、脇に縫い目を設けない丸胴ボディ、ラグランスリーブ、スウェット生地を二重にしたフード、フロントのカンガルーポケット、比較的長く設定された袖口と裾のリブなど、クラシックなアスレチックウェアを意識した構造を取り入れています。スティーブ・マックイーンへのオマージュを込めて仕上げられた、トイズマッコイこだわりの一着です。1枚でメインのプルオーバーパーカーとして着ても、ジャケット等のインナーとしてレイヤードアイテムとしても重宝される汎用性の高いパーカーです。
素材はコットン100%の14.8オンス・エクストラヘビーウェイト・裏起毛丸胴スウェット生地です。ゴツゴツとした糸本来の風合い、縦方向に連なる編み目の列、程よいムラ感を持った無骨な表情が特徴の肉厚なスウェット生地です。しっかりとしたコシとドライな風合いを備え、古き良きアメリカのスウェットウェアを思わせる素朴な空気感と、厚手生地ならではの重厚感、そして手に取った際にも感じられる確かな重量感を持っています。
生地の裏面には起毛加工が施されています。ループ状の糸がそのまま見える一般的な裏毛生地とは異なる、柔らかな起毛面を形成しています。起毛された繊維の間には細かな空気層が生まれやすく、スウェット生地そのものの厚みと組み合わさることで、身体から生じる暖かさを保持しやすい構造となっています。
身頃は、丸編み機によって胴部分を筒状に編み上げた、いわゆる「丸胴」仕様です。一般的なカットソーのように前身頃と後身頃を別々に構成し、左右の脇線で縫い合わせる構造とは異なり、身頃が一続きの筒状になっています。そのため、身頃の左右には縦方向のサイドシームがなく、それに伴う縫い代や生地の重なりも生じません。身体の側面に局部的な厚みや段差ができにく、すっきりとした側面の仕上がりとなります。丸胴構造は、ヴィンテージのアメリカンTシャツやスウェットシャツにも見られる伝統的な構造のひとつで、本製品のクラシックなアスレチックウェアらしい構成を形づくるディテールのひとつです。
また、本製品は製造工程で洗い加工を施していない、未洗い(ノンウォッシュ)仕上げです。そのため、新品時にはまだ洗濯による収縮が生じておらず、編み目がやや開いて見える場合があります。洗濯によって綿繊維と編地が自然に収縮し、編み目の間隔がやや詰まることで、新品時よりも密度感のある、しっかりとした風合いへ変化する傾向があります。冷水でやさしく手洗いし、形を整えて日陰で自然乾燥した場合、縮みは比較的軽微に収まりやすく、主に着丈方向にわずかに現れる傾向があります。身幅方向の変化は比較的小さい傾向にありますが、縮み方や縮みの程度は、洗濯方法、乾燥条件、製品ごとの個体差によって異なります。お湯での洗濯やタンブル乾燥は、編地に大きな収縮を生じさせ、縮みの程度を予測しにくくする可能性がありますので、お避けください。
袖はラグランスリーブ仕様です。衿元付近から脇下へ向かって斜めに伸びる縫い線によって、袖と身頃を接続しています。肩線を設けない構造のため、着用者の肩の形に沿って自然になじみやすい設計です。
フードは一枚仕立てではなく、身頃と同じスウェット生地を二重に使用した構造です。二重構造とすることでしっかりとした厚みとボリュームが生まれ、頭部を覆わず背面へ下ろした状態でも形がつぶれにくく、立体感のある輪郭を保ちやすい仕上がりです。
フードの前端は、左右の生地端を単純に突き合わせるのではなく、一方がもう一方に重なるように構成されています。フード前部には、ドローコードを通すための左右一対のボタンホール状の開口部が設けられており、そこに平紐タイプのドローコードが通されています。前端が重なり合う構造のため、着用時には左右のドローコードの出位置がわずかに非対称に見える場合があります。これはフード前端の重なり構造によって生じるもので、製品仕様上の特徴です。
前身頃には、左右から手を差し入れられるカンガルーポケットが取り付けられています。ポケットは、前身頃の表面に身頃と同じスウェット生地のパーツを重ねて縫い付ける構造で、左右の開口部が内部でつながる一室式です。収納物を確実に保持することを重視した構造というより、両手を差し入れやすいハンドウォーマーポケットとしての性格が強い仕様です。左右の開口部が大きく、内部が一続きになっているため、小物などを収納した場合には、内容物が開口部から落ちる可能性があります。
袖口には、身頃とは別パーツで編み立てたリブニットを使用しています。リブは折り返して二重にし、袖本体へ縫い付けられた構造です。身頃のスウェット生地よりも伸縮性が高く、手首へ適度にフィットしながら、腕の動きにも追従しやすく、袖口が必要以上に開くことを抑えています。袖口リブは一般的なスウェットウェアと比較して長めに設定されており、手首まわりを広い範囲で覆います。これにより袖口から冷気が入り込みにくくなるとともに、ヴィンテージアスレチックウェアを意識した特徴的な袖口のバランスを形成しています。
ウエストバンドには、袖口と同様に長めの別付けリブニットを使用しています。身頃本体よりも伸縮性のあるリブが腰まわりへ適度に沿い、裾をウエスト付近で収まりやすくする構造です。身頃の生地が裾リブの上でわずかにたまることで、クラシックなスウェットシャツ特有の丸みを帯びた、まとまりのあるシルエットを形成します。
フード、肩、アームホール、袖、袖口リブ、裾リブなどの主要な接合部には、2列のステッチが平行に走る2本針縫製を採用しています。これによって縫い合わせ部分の補強性を高めるとともに、接合部にかかる力を2列のステッチへ分散し、着用や動作を繰り返す箇所の安定性を確保しています。また、表面に平行して走る2本のステッチラインが、クラシックなスウェットウェアらしい縫製上の表情も生み出しています。
フロント身頃の左裾付近には、装飾用のネームタグが表側から縫い付けられています。この位置に配されたディテールが、無地を基調としたシンプルなデザインの中に控えめな視覚的ポイントを生み出し、衣服全体のすっきりとした印象を保ちながらアクセントを加えています。
1958年、妻であるニール・アダムスと暮らしていたローレルキャニオンの自宅でくつろぐマックイーンの姿が写真に納められています。そこで彼が身に着けていたのはホワイトジーンズにあわせたプルオーバーパーカーでした。多忙な日々のなかで過ごす彼のプライベートなひとときをイメージし、その雰囲気を現代に蘇らせたのが本製品です。クラシックなスウェットウェアの構造とディテールを随所に取り入れながら、スティーブ・マックイーンが身につけていたプルオーバーパーカーの雰囲気をTOYS McCOYならではの解釈で再構築した一着です。
「TOYS McCOY TMC2542 THE GREAT AMERICAN HERO HEAVYWEIGHT RAGLAN SWEAT PARKA / トイズマッコイ スポーツウェア プルオーバー パーカー 未洗い ノンウォッシュ仕上げ 14.8オンス ヘビーウェイト裏起毛スウェット生地 ラグランスリーブ ロングスリーブ フーデッドスウェットシャツ 丸胴ボディ メンズ カジュアル ファッション アメカジ 無地 かぶりパーカー スティーブマックイーンオフスクリーンモチーフ」
洗濯表記
手洗いができます。洗濯機は使用不可です。
漂白剤の使用禁止。
底面温度を低温として、あて布の上からアイロン仕上げができます。
ドライクリーニング禁止。
脱水せずに日陰で干してください。
タンブラー乾燥機はお避け下さい。
ご確認事項
- 在庫は実店舗および複数のオンラインストアで共有しているため、各サイトの在庫表示にリアルタイムで反映されない場合がございます。
- ご注文をいただいた場合でも、タイミングにより売り切れとなっていることがございます。何卒ご理解・ご了承くださいますようお願い申し上げます。
- すべての寸法は商品を平置きした状態で手作業により計測しているため、商品には個体差があり、計測方法によっても若干の誤差が生じる場合があります。
- 実際の色味は、撮影時の照明環境やご使用のモニター・画面設定により、写真と多少異なって見える場合がございます。
Product Description in English.
TOYS McCOY Men's Steve McQueen-Inspired Extra Heavyweight Raglan Pullover Hoodie, 14.8 oz Cotton Brushed-Back Fleece Hooded Sweatshirt, Tubular Body, Made in Japan TMC2542
TOYS McCOY
See available colors here
This men's pullover hooded sweatshirt is made in Japan by TOYS McCOY and is inspired by the pullover hoodie worn by Steve McQueen in an off-duty photograph. Reinterpreted as a tribute to McQueen, it is made from 14.8 oz extra-heavyweight 100% cotton brushed-back sweatshirt fabric and incorporates a tubular side-seam-free body, raglan sleeves, a double-layer hood, a front kangaroo pocket, and extended rib-knit cuffs and waistband. Major joining areas, including the hood, shoulders, armholes, sleeves, cuffs, and waistband, are reinforced with parallel two-needle stitching. Together, these details create a substantial, classic athletic-sweatshirt character with a clean, understated appearance, while the relatively short body length and balanced regular fit make it easy to wear either on its own or layered under a jacket or coat.
Size and Fit Guide:
Gender: Men.
This hoodie has a balanced regular fit that is neither tight nor loose. The body is not cut excessively slim, nor does it have the exaggerated volume of an intentionally oversized silhouette. Instead, it provides moderate room through the body while keeping the overall length relatively short, creating a classic, compact shape. The raglan sleeve construction eliminates conventional shoulder seams, with the sleeves extending diagonally from the neckline to the underarms so they conform naturally around the shoulders. A relatively deep rib-knit waistband gently draws in the lower body around the waist, allowing the sweatshirt fabric to blouse slightly above the ribbing and create the softly rounded silhouette characteristic of classic sweat hoodies. The cuffs also use extended rib knit, which fits comfortably around the wrists and keeps the sleeve ends neatly in place. This balanced construction makes the hoodie easy to wear as a standalone sweatshirt while also allowing it to layer comfortably under jackets and coats.
Because fit may vary depending on body type and personal preference, please use the actual garment measurements below as your primary reference. For the most accurate comparison, we recommend measuring a similar hooded sweatshirt that fits you well. All measurements are taken by hand with a measuring tape, so slight variations may occur between individual garments and depending on the measuring method.
Our model wears Tagged Size M. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements show the garment itself, not your body measurements.
Please compare them with a similar hoodie from your wardrobe to get a better sense of the fit.
In inches
Tagged Size S
Width: 20.1" / Length: 23.2"
Sleeve: 30.7"
Tagged Size M
Width: 21.3" / Length: 23.6"
Sleeve: 31.9"
Tagged Size L
Width: 22.0" / Length: 24.4"
Sleeve: 33.1"
Tagged Size XL
Width: 23.6" / Length: 25.2"
Sleeve: 33.9"
Tagged Size XXL
Width: 25.6" / Length: 25.6"
Sleeve: 34.6"
In centimeters
Tagged Size S
Width: 51cm / Length: 59cm
Sleeve: 78cm
Tagged Size M
Width: 54cm / Length: 60cm
Sleeve: 81cm
Tagged Size L
Width: 56cm / Length: 62cm
Sleeve: 84cm
Tagged Size XL
Width: 60cm / Length: 64cm
Sleeve: 86cm
Tagged Size XXL
Width: 65cm / Length: 65cm
Sleeve: 88cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Lay the garment flat and measure straight across from side to side, approximately 3cm (about 1.2 in.) below the underarms.
Length (Body Length): Measured from the base of the back collar, where the collar joins the body, straight down to the bottom of the hem.
Sleeve (Center-Back Sleeve Length): Measured from the center back at the base of the collar to the end of the cuff.
Shoulder Width: Not measured. Because this hoodie uses raglan sleeves without conventional shoulder seams, a standard shoulder-width measurement cannot be taken. Please use the width, length, and center-back sleeve measurements as the primary references when comparing sizes.
Made in Japan.
Brand new with tags, in unused condition.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Please note that slight variations in measurements may occur due to individual garment differences and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
1958 Steve McQueen Off-Screen Design Source
In 1958, Steve McQueen was photographed relaxing at his Laurel Canyon home, where he lived with his wife, Neile Adams. In the photograph, he wore a plain pullover sweatshirt hoodie with white jeans, creating a simple off-screen combination distinct from the costumes associated with his film roles.
This TOYS McCOY model takes that private moment and McQueen's understated pullover hoodie as its design source. Rather than relying on printed graphics or conspicuous decoration, the design is defined by the structure of the sweatshirt itself, including the extra-heavyweight cotton fabric, tubular body, raglan sleeves, double-layer hood, extended rib-knit components, kangaroo pocket, and visible double-needle stitching.
These elements reinterpret the atmosphere of McQueen's off-screen sweatshirt through TOYS McCOY's approach to vintage-inspired construction, producing a current pullover hoodie based on the proportions and functional details of classic American sweatwear.
14.8-Ounce Extra-Heavyweight 100% Cotton Sweatshirt Fabric
The sweatshirt is made from 14.8-ounce extra-heavyweight fabric knitted from 100% cotton. The material has substantial thickness, physical weight, and body, giving the garment a markedly heavier and more structured character than a lightweight or medium-weight sweatshirt.
The outer surface retains the rugged character of the yarns, with clearly visible vertical columns of knitted stitches. These vertically aligned columns, technically referred to as wales, are formed by successive knitted loops running along the length of the fabric. The wales remain visible across the surface and give the fabric an identifiable knitted structure rather than the flatter appearance of a woven textile.
The yarns and knitted loops also produce subtle natural variations in height, spacing, and surface texture. The fabric therefore does not appear completely smooth or mechanically uniform. Its slight irregularity and restrained surface variation create the straightforward, rugged appearance associated with traditional American sweatshirt fabrics.
The fabric has a firm body and a distinctly dry hand rather than an exceptionally soft, fluid, or loosely draped feel. Its substantial mass can also be felt when the garment is lifted or held in the hand. Together, the dry texture, firm resilience, visible knitted structure, and physical weight give the sweatshirt the substantial character expected from an extra-heavyweight fabric.
Brushed-Back Interior
The reverse side of the sweatshirt fabric is brushed to raise the cotton fibers and form a soft, finely napped interior surface. This differs from an unbrushed loopback sweatshirt fabric, where the looped yarn structure remains visibly exposed on the reverse side.
During brushing, fibers are lifted from the reverse surface without changing the fundamental knitted construction of the fabric. The resulting nap produces a softer interior texture while adding visible and tactile volume to the already substantial 14.8-ounce material.
Small spaces form among the raised fibers, allowing the brushed layer to hold pockets of air. When combined with the thickness and density of the extra-heavyweight sweatshirt fabric, this structure helps retain warmth generated by the body.
Tubular Side-Seam-Free Body
The torso is knitted as a continuous tube on a circular knitting machine, creating what is commonly referred to as a tubular body. Unlike conventional cut-and-sewn construction, the body is not assembled from separate front and back panels joined along the left and right sides.
Because the torso forms one continuous knitted section, there are no vertical side seams along either side of the body. The corresponding seam allowances, folded edges, and overlapping layers of fabric that would normally occur at these locations are also eliminated.
Removing these side seams helps prevent localized thickness, hardness, and raised ridges from forming along the sides of the torso. This is particularly relevant with an extra-heavyweight fabric, where conventional stacked seam allowances could otherwise produce noticeable bulk. The uninterrupted tubular construction also gives the sweatshirt a clean side profile without visible vertical seam lines.
Tubular body construction is a traditional method found on vintage American T-shirts and sweatshirts. On this model, it forms an integral part of the garment's classic athletic-wear construction rather than serving as an applied decorative feature.
Unwashed Finish and Shrinkage Characteristics
The completed sweatshirt is supplied in an unwashed condition and has not undergone a final washing treatment during production. In its new state, the cotton fibers and knitted loops have not yet contracted and settled through exposure to water and drying. As a result, the spaces between the knitted loops may initially appear slightly more open.
During laundering, the cotton fibers absorb water and the knitted structure contracts naturally. As the garment dries, the loops settle closer together and the spacing between them becomes slightly tighter. This process can give the fabric a denser, more compact appearance and a firmer, more cohesive hand than it has in its original unwashed condition.
When the sweatshirt is gently hand washed in cold water, reshaped, and allowed to dry naturally in the shade, the resulting shrinkage tends to remain comparatively slight. Dimensional change is more likely to appear in the vertical direction, particularly in the body length, while the change across the body width tends to be smaller.
The exact amount and direction of shrinkage cannot be guaranteed. Results may vary according to the individual garment, water temperature, washing duration, mechanical agitation, spin intensity, reshaping after washing, and drying conditions.
Warm or hot water and tumble drying can cause the cotton fibers and knitted structure to contract more extensively. These methods may produce greater and less predictable dimensional changes and should therefore be avoided.
Raglan Sleeve Construction
The sweatshirt uses raglan sleeves. Diagonal seams extend from the area near the neckline toward the underarms, joining each sleeve directly to the body.
This differs from set-in sleeve construction, where a shaped sleeve cap is attached to an armhole at the outer end of a defined shoulder seam. The raglan configuration eliminates a conventional shoulder seam positioned at a fixed shoulder point and creates a continuous transition from the neckline across the shoulder and into the upper arm.
Because the shoulder shape is not divided by a fixed horizontal shoulder seam, the sleeve and upper-body area can settle more naturally along the individual contours of the wearer's shoulders.
Double-Layer Hood Made from Matching Sweatshirt Fabric
The hood is constructed from two layers of the same sweatshirt fabric used for the body rather than as a single-layer component. Using the extra-heavyweight fabric on both the exterior and interior gives the hood substantial thickness, physical weight, and volume.
The double-layer structure supports the three-dimensional shape of the hood and helps prevent it from collapsing completely. When the hood is not worn over the head and rests against the upper back, it retains a fuller and more clearly defined outline than a lightweight single-layer hood.
Overlapping Hood Front with Buttonhole-Style Drawcord Openings
The front edges of the hood are not simply aligned edge to edge. Instead, one side overlaps the other at the front, creating a layered construction where the two sides meet near the neckline.
A pair of buttonhole-style openings is worked into the front of the hood to provide exit points for the drawcord. A flat drawcord passes through the hood channel and emerges through these two openings, allowing the circumference of the hood opening to be adjusted.
Because the hood front uses an overlapping construction, the two drawcord exit points may appear slightly asymmetrical when the garment is worn or viewed from the front. This visual difference results from the layered position of the hood edges and is a characteristic of the construction rather than a requirement for the openings to appear perfectly symmetrical.
Kangaroo Handwarmer Pocket
A kangaroo pocket made from the same sweatshirt fabric as the body is attached to the lower front. The pocket is constructed as a separate fabric panel laid over and sewn onto the exterior surface of the sweatshirt.
Openings on the left and right lead into one continuous interior compartment. Because the two sides are internally connected rather than divided into separate pockets, either hand can pass into the same central space from either opening.
The pocket is configured primarily as a handwarmer rather than as secure storage for small objects. Its large side openings provide easy access for both hands, but the continuous interior does not prevent stored items from moving toward and falling through either opening. Small valuables should therefore not be considered securely contained within the pocket.
Extended Double-Layer Rib-Knit Sleeve Cuffs
Each sleeve is finished with a separate rib-knit cuff. The rib-knit component is folded back on itself to form a double-layer structure and is then sewn to the end of the sweatshirt sleeve.
The rib knit has greater elasticity than the main sweatshirt fabric. This allows the cuff to follow the wrist with moderate tension while accommodating normal movement of the hand and arm. Its elasticity also helps prevent the sleeve opening from spreading excessively during wear.
The cuffs are proportionally longer than those used on many standard sweatshirts and cover a broader area around the wrists. This extended construction reduces open space at the sleeve ends through which cold air can enter while creating the distinctive long-cuff proportions associated with vintage-inspired athletic sweatwear.
Extended Rib-Knit Waistband
The lower body is finished with a separate extended rib-knit waistband. Like the sleeve cuffs, the waistband has greater elasticity than the extra-heavyweight sweatshirt fabric used for the body.
The rib knit follows the waist area with moderate tension and helps the lower edge of the sweatshirt settle around the waist rather than hanging freely below it. As the lower body is drawn inward by the waistband, a small amount of the substantial sweatshirt fabric gathers naturally above the ribbing.
This relationship between the full-bodied sweatshirt fabric and the more elastic waistband creates the softly rounded, cohesive silhouette associated with classic sweatshirt construction. The extended vertical depth of the ribbing also gives the lower body the longer waistband proportions characteristic of vintage-inspired athletic sweatwear.
Double-Needle Stitching at Major Component Junctions
Double-needle stitching is used at major junctions throughout the sweatshirt, including the hood, raglan shoulder areas, armholes, sleeves, cuff attachments, and waistband attachment. Two parallel rows of stitching secure the joined components at these structural locations.
Using two rows of stitching broadens the secured area compared with a single stitched row. It also distributes tension across two parallel rows where the garment is repeatedly subjected to movement and pulling, helping stabilize the joined sections during normal wear.
The parallel rows remain visible on the exterior and make the functional seam construction part of the sweatshirt's appearance. Rather than serving as a separate decorative application, the visible stitching follows the actual component junctions and contributes to the straightforward sewing character associated with classic American sweatwear.
Decorative Label at the Front Left Hem
A decorative label is sewn onto the exterior of the front body near the left hem. Its localized placement creates a subtle visual focal point within the otherwise plain design, adding a restrained accent while preserving the clean overall appearance of the garment.
Care Instructions
Hand wash only. Do not machine wash.
Do not bleach.
Iron at a low temperature using a pressing cloth.
Do not dry clean.
Do not use a machine spin cycle. Drip dry in the shade.
Do not tumble dry.
Because this garment is made from unwashed 100% cotton sweatshirt fabric, washing allows the cotton fibers and knitted structure to contract naturally. When gently hand washed in cold water, reshaped, and dried naturally in the shade, dimensional change tends to remain comparatively limited and may be more noticeable in the body-length direction than across the body. The actual degree and direction of shrinkage can vary according to water temperature, handling, drying conditions, and individual garment characteristics. Machine washing, warm or hot water, machine spin extraction, and tumble drying may cause greater and less predictable shrinkage and should be avoided.
Always follow the care instructions attached to the actual product.
Important Notes
- Inventory is shared among our physical retail store and multiple online stores. As a result, stock status may not be reflected on each website in real time.
- Depending on the timing of inventory updates, an item may already be sold out even after an order has been placed. We sincerely appreciate your understanding.
- All dimensions are measured manually with the garment laid flat. Because individual garments may vary and results can differ slightly depending on the measuring method, minor discrepancies may occur.
- The actual product color may appear slightly different from the photographs depending on the lighting conditions during photography and the settings of your monitor or display.