How We Measure the Actual Garment

We lay each garment flat and measure it by hand using a measuring tape.

How We Measure Pants and Jeans

• Waist: With the pants laid flat, we measure straight across the top of the waistband from edge to edge, then double that measurement to determine the actual waist size.
• Outseam: We measure straight from the top edge of the waistband to the bottom of the hem.
• Inseam: We measure straight from the crotch seam to the bottom of the hem along the inside seam.
• Front Rise: We measure straight from the crotch seam to the top edge of the front waistband.
• Thigh Width: We measure straight across the leg from edge to edge, approximately 3 cm below the crotch seam.
• Hem Width: We measure straight across the hem from edge to edge.

How We Measure Shirts, Sweatshirts, and T-Shirts

• Body Width: With the garment laid flat, we measure straight across from edge to edge, approximately 3 cm below the armpits.
• Body Length: We measure down the back from the base of the collar, where the body and collar are sewn together, to the bottom of the hem.
• Sleeve Length / Sleeve Length from Center Back: We measure from the center back at the base of the collar to the end of the cuff.
• Sleeve Length: When a sleeve length is shown in parentheses, it is measured from the top of the shoulder seam to the end of the cuff.
• Shoulder Width: We measure straight across from shoulder seam to shoulder seam.

Please Note About Measurements

All measurements are taken by hand. Due to the nature of manual measurement, slight differences may occur depending on individual product variation, fabric characteristics, and how the garment is laid flat during measurement.

Please understand that all listed measurements are approximate and should be used as a general guide.