ステュディオ・ダ・ルチザン 14oz デニムワークシャツ D5335 メンズ 長袖シャツ デニムシャツ ステュディオ・ダルチザン Studio D'artisan 新品
Sale price
26,180円 / JPY
Tax included
Free shipping within Japan
ステュディオ・ダ・ルチザン 14oz デニムワークシャツ D5335 メンズ 長袖シャツ デニムシャツ ステュディオ・ダルチザン Studio D'artisan 新品
Studio D'artisan / ステュディオ・ダ・ルチザン
サイズ実寸
シルエットは、スリムすぎずルーズすぎない、バランスの取れたレギュラーフィットです。通常のシャツとしてはもちろん、厚手でしっかりとした14ozデニムの生地感を活かして、Tシャツなどの上から羽織り、シャツジャケット感覚でも着用できます。着用と洗濯を重ねることで生地が徐々にこなれていき、身体に馴染んでいきます。
実際のフィット感は、着用するインナーの厚さや体型、好みの着用感によって異なります。サイズをお選びになる際は、お手持ちのサイズ感の合うデニムジャケットなどを平置きで計測し、身幅・着丈・裄丈・袖丈・肩幅を上記の実寸と比較してくださいますようお願いいたします。記載の寸法は身体の寸法ではなく、衣服そのものを平置きで計測した実寸です。身幅は脇下の左右を直線で測った幅で、胸まわり一周の寸法や着用者の胸囲ではありません。
身幅：衣服を平らに置き、脇から約3cm下の位置で、端から端までの幅を測定しています。
着丈：背中側の衿付け根部分(身頃と衿の縫い目)から、裾先までの長さを測定しています。衿の高さは含みません。
裄丈：背中の衿付け根中央部分から、肩を通って袖口のカフス先端までを測定しています。
袖丈(括弧内に記載している袖丈)：肩の縫い目上部から袖口のカフス先端までを測定しています。
肩幅：肩の縫い目から縫い目までを直線で測定しています。
サイズ計測方法はこちらです
※すべて手作業による計測のため、商品個体差や計測方法によって若干の誤差が生じる場合があります。あらかじめご了承ください。
品番
D5335 ( D-5335 )
色
Dark Indigo Denim - One Wash 濃色インディゴデニム ワンウォッシュ済み
素材
綿100% 14オンス デニム生地
状態・生産国
新品です Made in Japan 日本製
商品説明
STUDIO D'ARTISAN(ステュディオ・ダルチザン)の14オンス・デニムワークシャツ(メンズ 長袖シャツ デニムシャツ)です。
本製品は、クラシックなワークシャツをベースに、濃色インディゴの14オンスデニムで仕立てた一着です。実用性を重視した構造とディテールを備え、厚手のデニムならではの無骨で力強い表情に仕上げられています。一枚でシャツとして着用するほか、シャツとしては肉厚な14オンスデニムの生地感を活かして、Tシャツなどの上からシャツジャケット感覚で羽織ることもでき、アウターのインナーとしても活用できます。
素材は、綿100%の14オンス・ヘビーウェイト・右綾デニムです。一般的なシャツ地よりも厚みと重量感があり、しっかりとしたハリとコシを備えています。厚手の生地ならではの重厚な風合いと、ワークウェアに求められる耐久性を備えた、堅牢な生地です。
経糸にはインディゴ染めの糸を、緯糸には無染色系の糸を使用しています。生地表面には糸本来の微細なムラ感が見られ、緯糸が細かくのぞくことで、霜降りのような細かな色の濃淡が生まれています。控えめなざらつきと経糸・緯糸の色の対比が重なり、濃色インディゴに奥行きのある、素朴な表情を与えています。
本製品は、仕上げ工程でワンウォッシュ加工が施されています。一度洗いをかけることで、未洗いのデニム特有の極端な硬さはほどよく和らぎ、デニム生地のハリとコシを残しながら、着始めからこなれた風合いに仕上げられています。あらかじめ洗いをかけているため、未洗いの製品に比べて、その後の洗濯による大きな縮みは生じにくくなっています。ただし、綿100%の生地のため、洗濯方法や乾燥条件、製品の個体差によっては、さらに若干の寸法変化が生じる場合があります。
着用と洗濯を重ねることで生地が徐々に馴染み、インディゴの色合いにも自然な濃淡や褪色が現れます。襟の折り返し、前立て、ヨークの縫い目、ポケットの縁、肘、カフス、裾など、繰り返し折れ曲がる部分や摩擦を受けやすい箇所を中心に、デニム特有の色落ちが進んでいきます。色落ちの位置や濃淡は、着用者の動作や洗濯の頻度によって異なり、一着ごとに異なる表情へと変化していきます。
襟元は、台襟付きの折り返し襟(レギュラーシャツカラー)を採用しています。台襟が襟の土台部分を支えることで、襟まわりに適度な立体感を持たせています。
フロントは、ボタン開閉式のフルオープン仕様です。着用者から見て右身頃の前端には、首元を含めて6つのボタンを配置しています。右身頃の前端は、生地を内側へ折り返して二重にし、見返しと補強を兼ねた構造に仕立てられています。左身頃には、別裁ちの共生地を二重にした前立てを縫い付け、それぞれのボタンに対応する縦方向に開けられたボタンホールを設けています。第一ボタンと第二ボタンの間隔は、ほかのボタン間隔よりもやや狭く、第一ボタンのみを外した際にも、襟元が開きすぎにくい配置になっています。
胸の左右には、身頃の表面に直接縫い付けたパッチポケットを各1つ配置しています。左右のポケットは、ヴィンテージのワークシャツに見られるディテールを踏襲し、意図的にわずかな高さの差をつけて配置されています。この微妙な高さの違いはデザインの一部であり、製造上の欠陥ではありませんのでご了承ください。ポケット本体は、下部の両角を斜めに落とした形状です。ポケット口は、生地を内側へ折り返して二重にし、ステッチで固定することで口元を補強しています。折り返した生地の端には、セルビッジ(生地の耳)が配されています。また、ポケット口の中央には縦方向に開けられたボタンホールを設け、身頃に取り付けたボタンで留める構造です。着用者から見て左胸ポケット口には、ペン差しとして使用できる、横方向に開けられたボタンホール型の開口部も設けられています。両胸ポケット口の上部左右の角には、バータック(カンヌキ留め)による補強が施されています。口元の二重仕立てと角の補強を組み合わせ、物の出し入れや引っ張りによる負荷に備えた仕様です。
袖は、身頃のアームホールに縫い付けるセットインスリーブ仕様です。各袖は一枚の生地パーツを下袖側で縫い合わせ、筒状に仕立てています。袖口には1つボタンで留めるカフスを備え、その上の袖開き部分には、1つのボタンを配した剣ボロ(カフスプラケット)を設けています。カフスと剣ボロのボタンを外すことで袖口が大きく開き、着脱時に手を通しやすい構造です。剣ボロは、袖開きの縁を補強する役割も担っています。
すべてのボタンには、猫目ボタンを使用しています。ボタン表面の中央には、猫の目を思わせる細長い凹状の溝が設けられています。縫い付け糸がこの溝に収まるため、糸が表面から突出しにくく、摩擦や引っ掛かりによる摩耗を抑えやすい構造です。特徴的な外観と、縫い付け糸の保護を兼ね備えた、ワークウェア由来のディテールです。
背面上部には、生地を二重にしたバックヨークを備えています。肩まわりから背中上部を補強し、負荷がかかりやすい部分の安定性を高める構造です。ヨーク下の背中にはプリーツを設けず、すっきりとした背面に仕上げられています。
裾は、前後身頃の中央部分から両脇に向かって自然に高くなる曲線を描いた、ラウンド型のシャツテール仕様です。クラシックなワークシャツに見られる伝統的な裾形状で、裾を出して着用した際にも、前後の緩やかな曲線が自然な裾のラインを作ります。
両脇の縫い目の裾部分には、小さな三角形の補強マチ(サイドガゼット)を取り付けています。身体の動きや裾の引っ張りによって負荷が集中しやすい脇裾を補強し、脇縫いの終端や裾端にかかる力を分散することで、裂けやほつれを抑えやすくしています。古いワークシャツにも見られる、耐久性に配慮した実用的なディテールです。補強マチにはデニム生地の耳部分を使用し、ポケット口とともに、細部にセルビッジを取り入れています。
脇裾には、脇の縫い目の終端から伸びる2列の空環を残しています。空環とは、環縫い(チェーンステッチ)の縫製が生地端を越えた後に形成される、糸のループが連続した鎖状の糸端です。本製品では、脇の縫い目から続く空環を意図的に残すことで、ヴィンテージワークシャツに見られる縫製仕様を再現しています。空環の長さや糸のまとまり方には、多少の個体差が見られる場合があります。
脇、肩、アームホール、バックヨークなど、負荷のかかりやすい主要部分には、2本針巻き縫いを用いています。生地端を巻き込みながら2本のステッチで縫い合わせる方法で、縫い代を内側に収めた丈夫な縫い目となります。表側に現れる2列のステッチは、補強の役割とともに、ワークウェアらしい外観を引き立てるアクセントにもなっています。
クラシックなワークシャツの構造と、14オンスデニム生地ならではの厚みを兼ね備えた本製品は、ヴィンテージワークウェアの趣を再現しながらも、日常の装いにも合わせやすい一着です。
洗濯表記
液温は40℃を限度として、洗濯機で弱い洗濯処理ができます。
塩素系及び酸素系漂白剤の使用禁止。
底面温度を中温で、あて布の上から、アイロン仕上げができます。
ドライクリーニング禁止。
お取り扱いの際は、実際の商品に付属する洗濯表示をご確認ください。
ご確認事項
- 在庫は実店舗および複数のオンラインストアで共有しているため、各サイトの在庫表示にリアルタイムで反映されない場合がございます。
- ご注文をいただいた場合でも、タイミングにより売り切れとなっていることがございます。何卒ご理解・ご了承くださいますようお願い申し上げます。
- すべての寸法は、商品を平置きした状態で、メジャーを使用して手作業で計測しております。
- 商品には個体差があるため、また計測方法により、若干の誤差が生じる場合がございます。
- 実際の色味は、撮影時の照明環境やご使用のモニター・画面設定により、写真と多少異なって見える場合がございます。
Product Description in English.
Studio D'artisan Men's Vintage-Inspired Heavyweight 14 oz. Long-Sleeve Denim Work Shirt, 100% Cotton Right-Hand Twill, One-Wash, Made in Japan (SDA D5335, Dark Indigo)
Studio D'artisan
This men's long-sleeve denim work shirt is made in Japan by Studio D'artisan. Based on the practical construction of classic work shirts, this model combines vintage-inspired details with substantial 14 oz. 100% cotton right-hand twill denim in dark indigo. The one-wash finish softens some of the initial stiffness while preserving the fabric's firm, full-bodied hand. Its construction includes a shirt collar with a separate collar stand, a six-button front, buttoned chest patch pockets with selvedge at the folded openings, a left chest pen opening, cat's-eye buttons, single-button cuffs, a double-layer back yoke, a rounded shirttail hem, and selvedge side gussets with chainstitch runoff. Double-needle felled seams reinforce the major joining areas and contribute to the shirt's workwear appearance.
The balanced regular fit and heavyweight denim allow the shirt to be worn on its own, over a T-shirt as a shirt jacket, or beneath outerwear. Its understated design brings together the rugged texture of heavy denim and the functional details of traditional workwear in a form suited to everyday casual wear.
Size and Fit Guide:
Gender: Men.
The shirt has a balanced regular fit that is neither excessively slim nor overly loose. Its 14 oz. denim has considerably more thickness and substance than ordinary shirting, allowing it to be worn as a conventional button-up shirt or layered over a T-shirt as a shirt jacket. With repeated wear and washing, the denim gradually breaks in and conforms more naturally to the wearer's body.
The set-in sleeves provide defined shoulder and armhole seams, while the rounded shirttail hem sits lower at the center front and back and rises toward the sides. These construction details give the garment the outline of a classic work shirt, with the more substantial presence of heavyweight denim.
Actual fit will depend on your body type, preferred fit, and the thickness of any layers worn underneath. To help select your size, please lay flat and measure a similar heavyweight denim shirt or denim jacket that fits you well, then compare its chest width, body length, center-back sleeve length, shoulder-to-cuff sleeve length, and shoulder width with the measurements below. Please allow for the layers you intend to wear when making this comparison.
Our model wears Tagged Size 38. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements show the garment itself, not your body measurements. Width is the flat measurement across the garment and represents half of the garment's chest circumference, not the full circumference or the wearer's chest size.
In inches
Tagged Size 36
Width: 20.1" / Length: 26.4"
Sleeve: 31.5" (23.6") / Shoulder: 16.1"
Tagged Size 38
Width: 20.9" / Length: 27.6"
Sleeve: 32.7" (24.4") / Shoulder: 16.9"
Tagged Size 40
Width: 22.0" / Length: 28.7"
Sleeve: 34.3" (25.2") / Shoulder: 18.1"
Tagged Size 42
Width: 23.2" / Length: 29.1"
Sleeve: 35.4" (26.0") / Shoulder: 19.3"
Tagged Size 44
Width: 24.4" / Length: 29.9"
Sleeve: 36.2" (26.4") / Shoulder: 20.1"
In centimeters
Tagged Size 36
Width: 51cm / Length: 67cm
Sleeve: 80cm (60cm) / Shoulder: 41cm
Tagged Size 38
Width: 53cm / Length: 70cm
Sleeve: 83cm (62cm) / Shoulder: 43cm
Tagged Size 40
Width: 56cm / Length: 73cm
Sleeve: 87cm (64cm) / Shoulder: 46cm
Tagged Size 42
Width: 59cm / Length: 74cm
Sleeve: 90cm (66cm) / Shoulder: 49cm
Tagged Size 44
Width: 62cm / Length: 76cm
Sleeve: 92cm (67cm) / Shoulder: 51cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Lay the garment flat and measure straight across from side to side, approximately 3cm (about 1.2 in.) below the underarms.
Length (Body Length): Measured from the base of the back collar, at the seam where the collar joins the body, straight down to the bottom of the hem. The height of the collar is not included.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The sleeve measurement shown in parentheses is taken from the top of the shoulder seam down to the end of the cuff.
Shoulder (Shoulder Width): Measured straight across the back from one shoulder seam to the other.
Made in Japan.
- Brand new, in unused condition.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Please note that slight variations in measurements may occur due to individual garment differences and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
14 oz. Heavyweight 100% Cotton Right-Hand Twill Denim
The shirt is made from 14 oz. heavyweight denim woven from 100% cotton in a right-hand twill construction. The fabric has greater thickness and weight than typical shirt fabrics, together with a firm, substantial hand. Its body and resistance to bending give the garment a more structured presence than a lightweight denim shirt.
The material combines the substantial feel of heavy denim with the durability associated with workwear fabrics. Its thickness supports the shirt's use as an outer layer over a T-shirt, while the button-front construction also allows it to be worn as a regular long-sleeve shirt or beneath outerwear.
Indigo Warp, Natural-Colored Weft, and Subtle Surface Texture
The denim combines indigo-dyed warp yarns with light, natural-colored weft yarns. The warp yarns run lengthwise through the cloth, while the weft yarns pass across them. Fine glimpses of the lighter weft appear between the darker indigo yarns, producing small variations in tone across the face of the fabric.
Subtle irregularities in the yarns add a restrained unevenness to the surface. Together with the fine speckling created by the contrasting yarn colors, this produces a slightly grainy texture and visual depth within the dark indigo. The effect comes from the yarns and woven structure and contributes to the fabric's rustic workwear character.
One-Wash Finish
The garment is washed once during the finishing process. This initial wash eases some of the pronounced stiffness associated with unwashed denim, giving the fabric a more settled feel from the outset while retaining its firm body and substantial weight.
Because the garment has already been washed, major shrinkage during subsequent laundering is less likely than with an unwashed garment. The finish does not eliminate the possibility of further dimensional changes. As the fabric is 100% cotton, some additional shrinkage or other changes in size may occur depending on washing methods, drying conditions, and differences between individual garments.
Natural Indigo Fading Through Wear and Washing
Continued wear and washing gradually soften the denim and bring out changes in its indigo color. Areas repeatedly exposed to bending and friction, including the collar fold, front plackets, yoke seams, pocket edges, elbows, cuffs, and hem, tend to develop localized fading as the garment is used.
The contrast between these areas and the surrounding denim gives the shirt a progressively more individual appearance. The placement and intensity of the fading depend on the wearer's movements and washing frequency, so the pattern develops differently on each garment.
Regular Shirt Collar with a Separate Collar Stand
The neckline is finished with a conventional turn-down shirt collar attached to a separate collar stand. The stand forms the supporting band at the base of the collar, providing a foundation for the upper collar to fold over.
This construction gives the neckline moderate height and dimension. It supports the collar around the neck and creates the defined collar shape associated with a classic button-front work shirt.
Six-Button Front with Reinforced Plackets
The front opens fully and closes with six buttons, including the button at the neck. The buttons are positioned along the wearer's right front edge. On this side, the body fabric is folded inward to form a double layer that serves as both an integral facing and reinforcement beneath the buttons.
On the wearer's left side, a separately cut strip of matching denim is formed into a double-layer placket and sewn to the body. Vertically oriented buttonholes are worked into this placket to correspond with the six buttons. Both sides therefore have reinforced fabric around the fastening points, although the button side uses the folded body edge and the buttonhole side uses a separately attached placket.
The distance between the first and second buttons is slightly shorter than the spacing between the remaining buttons. This placement helps keep the neck opening relatively contained when only the top button is left undone.
Buttoned Chest Patch Pockets with Selvedge at the Openings
A patch pocket is sewn directly onto the outside of each chest panel. Each pocket has diagonally clipped lower corners, giving its lower outline an angled shape. The upper edge is folded inward to create a double-layer opening and secured with stitching, adding support where the pocket is repeatedly handled.
In keeping with details found on vintage work shirts, the left and right chest pockets are intentionally positioned at slightly different heights. Please note that this subtle difference in height is part of the shirt's design and is not a manufacturing defect.
The edge of the folded fabric incorporates the denim's selvedge, or finished woven edge. This places the selvedge inside the reinforced pocket mouth as a detail of the pocket construction.
A vertically oriented buttonhole is positioned at the center of each pocket opening. It fastens to a button attached to the shirt body behind the pocket, holding the center of the opening closed.
Left Chest Pen Opening and Bartack Reinforcement
The wearer's left chest pocket also includes a horizontally oriented opening worked in the form of a buttonhole at the pocket mouth. This provides a small access point that can be used as a pen slot.
The upper left and right corners of both pocket openings are reinforced with bartacks. These short, concentrated sections of stitching strengthen the corners where pulling forces can accumulate. Together, the doubled pocket mouths and reinforced corners help support the openings during repeated access and use.
Set-In Sleeves with One-Piece Sleeve Panels
The sleeves are sewn into the body's armholes using a set-in construction. Each sleeve is made from a single fabric panel that is joined along its underside to form a tube.
This arrangement creates a defined armhole seam where the sleeve meets the body, together with an underside seam that closes the sleeve itself. It provides the straightforward sleeve construction of a traditional long-sleeve work shirt.
Single-Button Cuffs and Buttoned Sleeve Plackets
Each sleeve ends in a cuff that closes with one button. Above the cuff, the sleeve opening is finished with a separate sleeve placket, also called a gauntlet placket, with an additional button of its own.
Unfastening both the cuff button and the placket button opens the lower sleeve more widely, making it easier to pass the hand through when putting the shirt on or taking it off. The placket also reinforces the edges of the sleeve opening, supporting the fabric around an area that is repeatedly opened and handled.
Cat's-Eye Buttons with Recessed Stitching Channels
Cat's-eye buttons are used throughout the garment. Each button has an elongated recessed channel across the center of its face, creating the distinctive shape that gives this button style its name.
The attachment thread sits within this channel, keeping it from projecting as prominently above the surrounding button surface. This arrangement helps reduce the thread's exposure to rubbing and snagging. The detail combines the recognizable appearance of a traditional workwear button with a practical means of protecting its stitching.
Double-Layer Back Yoke and a Pleat-Free Back
A double-layer denim yoke extends across the upper back. The additional layer reinforces the shoulder and upper-back area, providing support where movement and pulling place stress on the garment.
The back panel below the yoke is constructed without pleats. This leaves a clean, uninterrupted back surface beneath the reinforced upper section and maintains the shirt's straightforward workwear appearance.
Rounded Shirttail Hem
The hem follows a traditional rounded shirttail outline. Both the front and back sit lower at their centers, with the hem curving gradually upward toward the side seams.
When worn untucked, these gentle curves create a natural line around the lower body. The shape preserves the familiar profile of a classic work shirt while allowing the substantial denim to retain a shirt-like outline.
Triangular Selvedge Side Gussets
Small triangular fabric gussets reinforce the hem at the lower end of each side seam. This junction is exposed to pulling from body movement and tension along the hem, so the gussets provide additional support where these forces meet.
By helping distribute stress across the side-seam termination and adjacent hem edges, the gussets reduce the tendency for strain to concentrate at a single point and help limit tearing or fraying. They incorporate the selvedge edge of the denim, repeating the use of this woven edge at the pocket openings. The construction combines practical reinforcement with a detail found on older work shirts.
Double Chainstitch Runoff at the Side Hems
Two chains of stitching extend beyond the fabric at the lower end of each side seam. These are chainstitch runoffs: linked loops of thread formed as the chainstitch sewing continues past the fabric edge.
The thread chains are intentionally left extending from the side seams to reproduce a sewing detail associated with vintage work shirts. Their exposed looped structure records the continuation of the seam beyond the cloth. The length and the way the thread chains lie or gather may vary slightly between individual garments.
Double-Needle Felled Seams at Major Joining Areas
Key construction areas, including the sides, shoulders, armholes, and back yoke, use double-needle felled seams. The fabric edges are folded into the seam and secured with two parallel rows of stitching, enclosing the seam allowances within the joined construction.
This method produces a sturdy connection between the fabric panels in areas that are regularly subjected to stress. The two visible rows of stitching also outline the garment's construction, adding a restrained visual accent that complements the practical character of the work-shirt design.
Made in Japan
Studio D'artisan model D5335 is made in Japan. Its heavyweight indigo denim, reinforced pockets and seams, cat's-eye buttons, selvedge gussets, and retained chainstitch runoffs bring together the substantial feel of 14 oz. denim and the functional construction of a classic work shirt. The result is a vintage-inspired garment that works naturally as a standalone shirt, a shirt jacket over a T-shirt, or a layer beneath outerwear.
Care Instructions
Machine wash on a gentle cycle at a maximum water temperature of 40°C (104°F).
Do not use chlorine bleach or oxygen bleach.
Iron at a medium setting with a pressing cloth between the iron and the garment.
Do not dry clean.
The garment has been washed once during production. Some further shrinkage or other dimensional change may occur depending on washing methods, drying conditions, and individual garment differences.
Always follow the care instructions attached to the actual product.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.
Studio D'artisan / ステュディオ・ダ・ルチザン
サイズ実寸
| サイズ実寸 | 身幅 | 着丈 | 裄丈 (袖丈) | 肩幅 |
| 36(メンズSサイズ) | 51cm | 67cm | 80cm (60cm) | 41cm |
| 38(メンズMサイズ) | 53cm | 70cm | 83cm (62cm) | 43cm |
| 40(メンズLサイズ) | 56cm | 73cm | 87cm (64cm) | 46cm |
| 42(メンズXLサイズ) | 59cm | 74cm | 90cm (66cm) | 49cm |
| 44(メンズXXLサイズ) | 62cm | 76cm | 92cm (67cm) | 51cm |
実際のフィット感は、着用するインナーの厚さや体型、好みの着用感によって異なります。サイズをお選びになる際は、お手持ちのサイズ感の合うデニムジャケットなどを平置きで計測し、身幅・着丈・裄丈・袖丈・肩幅を上記の実寸と比較してくださいますようお願いいたします。記載の寸法は身体の寸法ではなく、衣服そのものを平置きで計測した実寸です。身幅は脇下の左右を直線で測った幅で、胸まわり一周の寸法や着用者の胸囲ではありません。
身幅：衣服を平らに置き、脇から約3cm下の位置で、端から端までの幅を測定しています。
着丈：背中側の衿付け根部分(身頃と衿の縫い目)から、裾先までの長さを測定しています。衿の高さは含みません。
裄丈：背中の衿付け根中央部分から、肩を通って袖口のカフス先端までを測定しています。
袖丈(括弧内に記載している袖丈)：肩の縫い目上部から袖口のカフス先端までを測定しています。
肩幅：肩の縫い目から縫い目までを直線で測定しています。
サイズ計測方法はこちらです
※すべて手作業による計測のため、商品個体差や計測方法によって若干の誤差が生じる場合があります。あらかじめご了承ください。
品番
D5335 ( D-5335 )
色
Dark Indigo Denim - One Wash 濃色インディゴデニム ワンウォッシュ済み
素材
綿100% 14オンス デニム生地
状態・生産国
新品です Made in Japan 日本製
商品説明
STUDIO D'ARTISAN(ステュディオ・ダルチザン)の14オンス・デニムワークシャツ(メンズ 長袖シャツ デニムシャツ)です。
本製品は、クラシックなワークシャツをベースに、濃色インディゴの14オンスデニムで仕立てた一着です。実用性を重視した構造とディテールを備え、厚手のデニムならではの無骨で力強い表情に仕上げられています。一枚でシャツとして着用するほか、シャツとしては肉厚な14オンスデニムの生地感を活かして、Tシャツなどの上からシャツジャケット感覚で羽織ることもでき、アウターのインナーとしても活用できます。
素材は、綿100%の14オンス・ヘビーウェイト・右綾デニムです。一般的なシャツ地よりも厚みと重量感があり、しっかりとしたハリとコシを備えています。厚手の生地ならではの重厚な風合いと、ワークウェアに求められる耐久性を備えた、堅牢な生地です。
経糸にはインディゴ染めの糸を、緯糸には無染色系の糸を使用しています。生地表面には糸本来の微細なムラ感が見られ、緯糸が細かくのぞくことで、霜降りのような細かな色の濃淡が生まれています。控えめなざらつきと経糸・緯糸の色の対比が重なり、濃色インディゴに奥行きのある、素朴な表情を与えています。
本製品は、仕上げ工程でワンウォッシュ加工が施されています。一度洗いをかけることで、未洗いのデニム特有の極端な硬さはほどよく和らぎ、デニム生地のハリとコシを残しながら、着始めからこなれた風合いに仕上げられています。あらかじめ洗いをかけているため、未洗いの製品に比べて、その後の洗濯による大きな縮みは生じにくくなっています。ただし、綿100%の生地のため、洗濯方法や乾燥条件、製品の個体差によっては、さらに若干の寸法変化が生じる場合があります。
着用と洗濯を重ねることで生地が徐々に馴染み、インディゴの色合いにも自然な濃淡や褪色が現れます。襟の折り返し、前立て、ヨークの縫い目、ポケットの縁、肘、カフス、裾など、繰り返し折れ曲がる部分や摩擦を受けやすい箇所を中心に、デニム特有の色落ちが進んでいきます。色落ちの位置や濃淡は、着用者の動作や洗濯の頻度によって異なり、一着ごとに異なる表情へと変化していきます。
襟元は、台襟付きの折り返し襟(レギュラーシャツカラー)を採用しています。台襟が襟の土台部分を支えることで、襟まわりに適度な立体感を持たせています。
フロントは、ボタン開閉式のフルオープン仕様です。着用者から見て右身頃の前端には、首元を含めて6つのボタンを配置しています。右身頃の前端は、生地を内側へ折り返して二重にし、見返しと補強を兼ねた構造に仕立てられています。左身頃には、別裁ちの共生地を二重にした前立てを縫い付け、それぞれのボタンに対応する縦方向に開けられたボタンホールを設けています。第一ボタンと第二ボタンの間隔は、ほかのボタン間隔よりもやや狭く、第一ボタンのみを外した際にも、襟元が開きすぎにくい配置になっています。
胸の左右には、身頃の表面に直接縫い付けたパッチポケットを各1つ配置しています。左右のポケットは、ヴィンテージのワークシャツに見られるディテールを踏襲し、意図的にわずかな高さの差をつけて配置されています。この微妙な高さの違いはデザインの一部であり、製造上の欠陥ではありませんのでご了承ください。ポケット本体は、下部の両角を斜めに落とした形状です。ポケット口は、生地を内側へ折り返して二重にし、ステッチで固定することで口元を補強しています。折り返した生地の端には、セルビッジ(生地の耳)が配されています。また、ポケット口の中央には縦方向に開けられたボタンホールを設け、身頃に取り付けたボタンで留める構造です。着用者から見て左胸ポケット口には、ペン差しとして使用できる、横方向に開けられたボタンホール型の開口部も設けられています。両胸ポケット口の上部左右の角には、バータック(カンヌキ留め)による補強が施されています。口元の二重仕立てと角の補強を組み合わせ、物の出し入れや引っ張りによる負荷に備えた仕様です。
袖は、身頃のアームホールに縫い付けるセットインスリーブ仕様です。各袖は一枚の生地パーツを下袖側で縫い合わせ、筒状に仕立てています。袖口には1つボタンで留めるカフスを備え、その上の袖開き部分には、1つのボタンを配した剣ボロ(カフスプラケット)を設けています。カフスと剣ボロのボタンを外すことで袖口が大きく開き、着脱時に手を通しやすい構造です。剣ボロは、袖開きの縁を補強する役割も担っています。
すべてのボタンには、猫目ボタンを使用しています。ボタン表面の中央には、猫の目を思わせる細長い凹状の溝が設けられています。縫い付け糸がこの溝に収まるため、糸が表面から突出しにくく、摩擦や引っ掛かりによる摩耗を抑えやすい構造です。特徴的な外観と、縫い付け糸の保護を兼ね備えた、ワークウェア由来のディテールです。
背面上部には、生地を二重にしたバックヨークを備えています。肩まわりから背中上部を補強し、負荷がかかりやすい部分の安定性を高める構造です。ヨーク下の背中にはプリーツを設けず、すっきりとした背面に仕上げられています。
裾は、前後身頃の中央部分から両脇に向かって自然に高くなる曲線を描いた、ラウンド型のシャツテール仕様です。クラシックなワークシャツに見られる伝統的な裾形状で、裾を出して着用した際にも、前後の緩やかな曲線が自然な裾のラインを作ります。
両脇の縫い目の裾部分には、小さな三角形の補強マチ(サイドガゼット)を取り付けています。身体の動きや裾の引っ張りによって負荷が集中しやすい脇裾を補強し、脇縫いの終端や裾端にかかる力を分散することで、裂けやほつれを抑えやすくしています。古いワークシャツにも見られる、耐久性に配慮した実用的なディテールです。補強マチにはデニム生地の耳部分を使用し、ポケット口とともに、細部にセルビッジを取り入れています。
脇裾には、脇の縫い目の終端から伸びる2列の空環を残しています。空環とは、環縫い(チェーンステッチ)の縫製が生地端を越えた後に形成される、糸のループが連続した鎖状の糸端です。本製品では、脇の縫い目から続く空環を意図的に残すことで、ヴィンテージワークシャツに見られる縫製仕様を再現しています。空環の長さや糸のまとまり方には、多少の個体差が見られる場合があります。
脇、肩、アームホール、バックヨークなど、負荷のかかりやすい主要部分には、2本針巻き縫いを用いています。生地端を巻き込みながら2本のステッチで縫い合わせる方法で、縫い代を内側に収めた丈夫な縫い目となります。表側に現れる2列のステッチは、補強の役割とともに、ワークウェアらしい外観を引き立てるアクセントにもなっています。
クラシックなワークシャツの構造と、14オンスデニム生地ならではの厚みを兼ね備えた本製品は、ヴィンテージワークウェアの趣を再現しながらも、日常の装いにも合わせやすい一着です。
洗濯表記
液温は40℃を限度として、洗濯機で弱い洗濯処理ができます。
塩素系及び酸素系漂白剤の使用禁止。
底面温度を中温で、あて布の上から、アイロン仕上げができます。
ドライクリーニング禁止。
お取り扱いの際は、実際の商品に付属する洗濯表示をご確認ください。
ご確認事項
- 在庫は実店舗および複数のオンラインストアで共有しているため、各サイトの在庫表示にリアルタイムで反映されない場合がございます。
- ご注文をいただいた場合でも、タイミングにより売り切れとなっていることがございます。何卒ご理解・ご了承くださいますようお願い申し上げます。
- すべての寸法は、商品を平置きした状態で、メジャーを使用して手作業で計測しております。
- 商品には個体差があるため、また計測方法により、若干の誤差が生じる場合がございます。
- 実際の色味は、撮影時の照明環境やご使用のモニター・画面設定により、写真と多少異なって見える場合がございます。
Product Description in English.
Studio D'artisan Men's Vintage-Inspired Heavyweight 14 oz. Long-Sleeve Denim Work Shirt, 100% Cotton Right-Hand Twill, One-Wash, Made in Japan (SDA D5335, Dark Indigo)
Studio D'artisan
This men's long-sleeve denim work shirt is made in Japan by Studio D'artisan. Based on the practical construction of classic work shirts, this model combines vintage-inspired details with substantial 14 oz. 100% cotton right-hand twill denim in dark indigo. The one-wash finish softens some of the initial stiffness while preserving the fabric's firm, full-bodied hand. Its construction includes a shirt collar with a separate collar stand, a six-button front, buttoned chest patch pockets with selvedge at the folded openings, a left chest pen opening, cat's-eye buttons, single-button cuffs, a double-layer back yoke, a rounded shirttail hem, and selvedge side gussets with chainstitch runoff. Double-needle felled seams reinforce the major joining areas and contribute to the shirt's workwear appearance.
The balanced regular fit and heavyweight denim allow the shirt to be worn on its own, over a T-shirt as a shirt jacket, or beneath outerwear. Its understated design brings together the rugged texture of heavy denim and the functional details of traditional workwear in a form suited to everyday casual wear.
Size and Fit Guide:
Gender: Men.
The shirt has a balanced regular fit that is neither excessively slim nor overly loose. Its 14 oz. denim has considerably more thickness and substance than ordinary shirting, allowing it to be worn as a conventional button-up shirt or layered over a T-shirt as a shirt jacket. With repeated wear and washing, the denim gradually breaks in and conforms more naturally to the wearer's body.
The set-in sleeves provide defined shoulder and armhole seams, while the rounded shirttail hem sits lower at the center front and back and rises toward the sides. These construction details give the garment the outline of a classic work shirt, with the more substantial presence of heavyweight denim.
Actual fit will depend on your body type, preferred fit, and the thickness of any layers worn underneath. To help select your size, please lay flat and measure a similar heavyweight denim shirt or denim jacket that fits you well, then compare its chest width, body length, center-back sleeve length, shoulder-to-cuff sleeve length, and shoulder width with the measurements below. Please allow for the layers you intend to wear when making this comparison.
Our model wears Tagged Size 38. He is 175 cm / approximately 5'9" tall, weighs 59 kg / approximately 130 lbs, and has a 91 cm / approximately 36" chest. For reference, he normally wears a US/EU size S/36.
The following measurements show the garment itself, not your body measurements. Width is the flat measurement across the garment and represents half of the garment's chest circumference, not the full circumference or the wearer's chest size.
In inches
Tagged Size 36
Width: 20.1" / Length: 26.4"
Sleeve: 31.5" (23.6") / Shoulder: 16.1"
Tagged Size 38
Width: 20.9" / Length: 27.6"
Sleeve: 32.7" (24.4") / Shoulder: 16.9"
Tagged Size 40
Width: 22.0" / Length: 28.7"
Sleeve: 34.3" (25.2") / Shoulder: 18.1"
Tagged Size 42
Width: 23.2" / Length: 29.1"
Sleeve: 35.4" (26.0") / Shoulder: 19.3"
Tagged Size 44
Width: 24.4" / Length: 29.9"
Sleeve: 36.2" (26.4") / Shoulder: 20.1"
In centimeters
Tagged Size 36
Width: 51cm / Length: 67cm
Sleeve: 80cm (60cm) / Shoulder: 41cm
Tagged Size 38
Width: 53cm / Length: 70cm
Sleeve: 83cm (62cm) / Shoulder: 43cm
Tagged Size 40
Width: 56cm / Length: 73cm
Sleeve: 87cm (64cm) / Shoulder: 46cm
Tagged Size 42
Width: 59cm / Length: 74cm
Sleeve: 90cm (66cm) / Shoulder: 49cm
Tagged Size 44
Width: 62cm / Length: 76cm
Sleeve: 92cm (67cm) / Shoulder: 51cm
[How We Measure the Actual Garment]
Width (Chest Width / Half Chest): Lay the garment flat and measure straight across from side to side, approximately 3cm (about 1.2 in.) below the underarms.
Length (Body Length): Measured from the base of the back collar, at the seam where the collar joins the body, straight down to the bottom of the hem. The height of the collar is not included.
Sleeve (Center-Back Sleeve Length): The first sleeve measurement is taken from the center back at the base of the collar seam, across the shoulder, and down to the end of the cuff.
Sleeve in Parentheses (Sleeve Length from Shoulder Seam): The sleeve measurement shown in parentheses is taken from the top of the shoulder seam down to the end of the cuff.
Shoulder (Shoulder Width): Measured straight across the back from one shoulder seam to the other.
Made in Japan.
- Brand new, in unused condition.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Please note that slight variations in measurements may occur due to individual garment differences and the measuring method.
- Actual color may vary slightly from the photos due to lighting conditions and individual screen settings.
14 oz. Heavyweight 100% Cotton Right-Hand Twill Denim
The shirt is made from 14 oz. heavyweight denim woven from 100% cotton in a right-hand twill construction. The fabric has greater thickness and weight than typical shirt fabrics, together with a firm, substantial hand. Its body and resistance to bending give the garment a more structured presence than a lightweight denim shirt.
The material combines the substantial feel of heavy denim with the durability associated with workwear fabrics. Its thickness supports the shirt's use as an outer layer over a T-shirt, while the button-front construction also allows it to be worn as a regular long-sleeve shirt or beneath outerwear.
Indigo Warp, Natural-Colored Weft, and Subtle Surface Texture
The denim combines indigo-dyed warp yarns with light, natural-colored weft yarns. The warp yarns run lengthwise through the cloth, while the weft yarns pass across them. Fine glimpses of the lighter weft appear between the darker indigo yarns, producing small variations in tone across the face of the fabric.
Subtle irregularities in the yarns add a restrained unevenness to the surface. Together with the fine speckling created by the contrasting yarn colors, this produces a slightly grainy texture and visual depth within the dark indigo. The effect comes from the yarns and woven structure and contributes to the fabric's rustic workwear character.
One-Wash Finish
The garment is washed once during the finishing process. This initial wash eases some of the pronounced stiffness associated with unwashed denim, giving the fabric a more settled feel from the outset while retaining its firm body and substantial weight.
Because the garment has already been washed, major shrinkage during subsequent laundering is less likely than with an unwashed garment. The finish does not eliminate the possibility of further dimensional changes. As the fabric is 100% cotton, some additional shrinkage or other changes in size may occur depending on washing methods, drying conditions, and differences between individual garments.
Natural Indigo Fading Through Wear and Washing
Continued wear and washing gradually soften the denim and bring out changes in its indigo color. Areas repeatedly exposed to bending and friction, including the collar fold, front plackets, yoke seams, pocket edges, elbows, cuffs, and hem, tend to develop localized fading as the garment is used.
The contrast between these areas and the surrounding denim gives the shirt a progressively more individual appearance. The placement and intensity of the fading depend on the wearer's movements and washing frequency, so the pattern develops differently on each garment.
Regular Shirt Collar with a Separate Collar Stand
The neckline is finished with a conventional turn-down shirt collar attached to a separate collar stand. The stand forms the supporting band at the base of the collar, providing a foundation for the upper collar to fold over.
This construction gives the neckline moderate height and dimension. It supports the collar around the neck and creates the defined collar shape associated with a classic button-front work shirt.
Six-Button Front with Reinforced Plackets
The front opens fully and closes with six buttons, including the button at the neck. The buttons are positioned along the wearer's right front edge. On this side, the body fabric is folded inward to form a double layer that serves as both an integral facing and reinforcement beneath the buttons.
On the wearer's left side, a separately cut strip of matching denim is formed into a double-layer placket and sewn to the body. Vertically oriented buttonholes are worked into this placket to correspond with the six buttons. Both sides therefore have reinforced fabric around the fastening points, although the button side uses the folded body edge and the buttonhole side uses a separately attached placket.
The distance between the first and second buttons is slightly shorter than the spacing between the remaining buttons. This placement helps keep the neck opening relatively contained when only the top button is left undone.
Buttoned Chest Patch Pockets with Selvedge at the Openings
A patch pocket is sewn directly onto the outside of each chest panel. Each pocket has diagonally clipped lower corners, giving its lower outline an angled shape. The upper edge is folded inward to create a double-layer opening and secured with stitching, adding support where the pocket is repeatedly handled.
In keeping with details found on vintage work shirts, the left and right chest pockets are intentionally positioned at slightly different heights. Please note that this subtle difference in height is part of the shirt's design and is not a manufacturing defect.
The edge of the folded fabric incorporates the denim's selvedge, or finished woven edge. This places the selvedge inside the reinforced pocket mouth as a detail of the pocket construction.
A vertically oriented buttonhole is positioned at the center of each pocket opening. It fastens to a button attached to the shirt body behind the pocket, holding the center of the opening closed.
Left Chest Pen Opening and Bartack Reinforcement
The wearer's left chest pocket also includes a horizontally oriented opening worked in the form of a buttonhole at the pocket mouth. This provides a small access point that can be used as a pen slot.
The upper left and right corners of both pocket openings are reinforced with bartacks. These short, concentrated sections of stitching strengthen the corners where pulling forces can accumulate. Together, the doubled pocket mouths and reinforced corners help support the openings during repeated access and use.
Set-In Sleeves with One-Piece Sleeve Panels
The sleeves are sewn into the body's armholes using a set-in construction. Each sleeve is made from a single fabric panel that is joined along its underside to form a tube.
This arrangement creates a defined armhole seam where the sleeve meets the body, together with an underside seam that closes the sleeve itself. It provides the straightforward sleeve construction of a traditional long-sleeve work shirt.
Single-Button Cuffs and Buttoned Sleeve Plackets
Each sleeve ends in a cuff that closes with one button. Above the cuff, the sleeve opening is finished with a separate sleeve placket, also called a gauntlet placket, with an additional button of its own.
Unfastening both the cuff button and the placket button opens the lower sleeve more widely, making it easier to pass the hand through when putting the shirt on or taking it off. The placket also reinforces the edges of the sleeve opening, supporting the fabric around an area that is repeatedly opened and handled.
Cat's-Eye Buttons with Recessed Stitching Channels
Cat's-eye buttons are used throughout the garment. Each button has an elongated recessed channel across the center of its face, creating the distinctive shape that gives this button style its name.
The attachment thread sits within this channel, keeping it from projecting as prominently above the surrounding button surface. This arrangement helps reduce the thread's exposure to rubbing and snagging. The detail combines the recognizable appearance of a traditional workwear button with a practical means of protecting its stitching.
Double-Layer Back Yoke and a Pleat-Free Back
A double-layer denim yoke extends across the upper back. The additional layer reinforces the shoulder and upper-back area, providing support where movement and pulling place stress on the garment.
The back panel below the yoke is constructed without pleats. This leaves a clean, uninterrupted back surface beneath the reinforced upper section and maintains the shirt's straightforward workwear appearance.
Rounded Shirttail Hem
The hem follows a traditional rounded shirttail outline. Both the front and back sit lower at their centers, with the hem curving gradually upward toward the side seams.
When worn untucked, these gentle curves create a natural line around the lower body. The shape preserves the familiar profile of a classic work shirt while allowing the substantial denim to retain a shirt-like outline.
Triangular Selvedge Side Gussets
Small triangular fabric gussets reinforce the hem at the lower end of each side seam. This junction is exposed to pulling from body movement and tension along the hem, so the gussets provide additional support where these forces meet.
By helping distribute stress across the side-seam termination and adjacent hem edges, the gussets reduce the tendency for strain to concentrate at a single point and help limit tearing or fraying. They incorporate the selvedge edge of the denim, repeating the use of this woven edge at the pocket openings. The construction combines practical reinforcement with a detail found on older work shirts.
Double Chainstitch Runoff at the Side Hems
Two chains of stitching extend beyond the fabric at the lower end of each side seam. These are chainstitch runoffs: linked loops of thread formed as the chainstitch sewing continues past the fabric edge.
The thread chains are intentionally left extending from the side seams to reproduce a sewing detail associated with vintage work shirts. Their exposed looped structure records the continuation of the seam beyond the cloth. The length and the way the thread chains lie or gather may vary slightly between individual garments.
Double-Needle Felled Seams at Major Joining Areas
Key construction areas, including the sides, shoulders, armholes, and back yoke, use double-needle felled seams. The fabric edges are folded into the seam and secured with two parallel rows of stitching, enclosing the seam allowances within the joined construction.
This method produces a sturdy connection between the fabric panels in areas that are regularly subjected to stress. The two visible rows of stitching also outline the garment's construction, adding a restrained visual accent that complements the practical character of the work-shirt design.
Made in Japan
Studio D'artisan model D5335 is made in Japan. Its heavyweight indigo denim, reinforced pockets and seams, cat's-eye buttons, selvedge gussets, and retained chainstitch runoffs bring together the substantial feel of 14 oz. denim and the functional construction of a classic work shirt. The result is a vintage-inspired garment that works naturally as a standalone shirt, a shirt jacket over a T-shirt, or a layer beneath outerwear.
Care Instructions
Machine wash on a gentle cycle at a maximum water temperature of 40°C (104°F).
Do not use chlorine bleach or oxygen bleach.
Iron at a medium setting with a pressing cloth between the iron and the garment.
Do not dry clean.
The garment has been washed once during production. Some further shrinkage or other dimensional change may occur depending on washing methods, drying conditions, and individual garment differences.
Always follow the care instructions attached to the actual product.
Important Notes
- Our inventory is shared among our physical retail store and multiple online stores, so inventory changes may not always be reflected immediately on each website.
- Even after an order has been placed, an item may occasionally be sold out due to the timing of simultaneous purchases. We sincerely appreciate your understanding.
- All measurements are taken by hand with the garment laid flat, using a measuring tape.
- Because individual garments and measuring methods may vary, slight measurement differences may occur.
- The actual color of the product may appear slightly different from the photographs depending on lighting conditions and the settings of your monitor or display.